The Ultimate SynthDB

Browse

Description	The S900 sampler was Akai's first truly professional sampler, released in 1986. Its sampling specifications were pro-quality at the time: 12-bit stereo sampling, 7.5kHz to 40kHz variable sampling rates and a maximum of 63 seconds of sample time at 7.5kHz. Up to 32 samples can be created and stored to disk along with any edit settings. This was one of the first rack-mount samplers to use a built-in disk drive. Although the drive could load sounds while you play, it was still a very slow process. Editing and programming the S900 is a very good precursor to the advanced S3000 series. There are lots of advanced edit capabilities for looping, truncating, velocity crossfading, tuning and even analog-like parameters to control. Individual outputs for each of the eight voices, stereo mix out, stereo input, MIDI and trigger inputs round out this machine as a professional vintage-status sampler that still proves to be very useful even for today's musicians!
Brand	Akai
Model	S900
Device	Sampler
Type	Rack
Engine Type	Digital
Engine	Sample
Voices (max)	8
Oscillators	1
Sampler	12-bit linear, 7.5 - 40kHz sampling rates (63 seconds)
Envelope (VCA)	ADSR
Memory	750 kB RAM
Keys	0
Key type	N/A
Velocity	N/A
Aftertouch	N/A
Midi	I-O
Extra info	Optional 8 trigger-inputs via ME35T-board
Produced:	1986 - 1986

Legend:		Obvious	Y: Yes, N: No, N/A: Not Applicable
VCO	Voltage Controlled Oscillator	DCO	Digital Controlled Oscillator
LFO	Low Frequency Oscillator	Sub	Sub Oscillator
VCF	Voltage Controlled Filter	VCA	Voltage Controlled Amplifier
Velocity	As with a piano, the harder you hit a key, the louder the sound, unlike most organs which always produce the same loudness no matter how hard you hit a key.	Aftertouch	Pressing a key after you activated it. Channel Aftertouch, no matter which key, it will send a Channel message. Poly Aftertouch, sends the pressure per key instead of the whole channel.
Values for OSC, LFO, Filter, Envelope are per voice unless stated otherwise.

Synth DB